E-Bench KH 224 Operating Instructions Manual
Also see for KH 224: Operating instructionsOperating instructionsOperating instructions
                            | |
To control the Volume• Turn the On/Off switch with volume control w upwards to increasethe volume.• Turn the On/Off switch with volume control w downwards toreduce the volume.Selecting a waveband• Place the band selection switch a in the AM position for mediumwave reception (MW) and/or FM for very high frequency reception(VHF).• Lift the telescopic antenna q up and pull it out.Important!The telescopic antenna q does not rotate!Adjusting the frequency• By using the frequency setting wheel o you can set the desiredfrequency to the AM (kHz) and/or FM (MHz) scale r.• Adjust the pocket radio for optimal reception.• When a transmission with full signal strength is received theTUNING y indicator lights up.Notice:To improve the reception of radio stations in the FM frequency rangeturn the radio and the telescopic antenna q slowly in variousdirections. When you have found a good reception position forthe set radio station leave the radio and telescopic antenna in thisposition. For the reception of AM transmissions, an antenna is builtinto the device. For improved reception, alter the position of the de-vice in radio mode.- 8 - |
Related manuals for E-Bench KH 224
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine