E-castle EOS?9604 User Manual
                                               | |
‐ 44 ‐4.4.6. RECSelect REC button on main menu, on remote control or on front panel. Then, all channels will recordregardless of previous recording schedule setup. This function can be used when unexpected incident occursin channels that are not recording by operator, it is said to be panic or instant recording. Pressing One moreREC button makes DVR go back to the previous recording schedule setup. During Panic recoding, Icon isdisplayed in each channel.¾ Example: While only channel 2,3 and 4 are recording by the current recording schedule, unexpectedincident is happening on channel 1, so channel 1 needs to be recorded.In this case, select REC function instantly on remote control or on front key. Then all channels will berecorded as panic recording status.4.4.7. LOG OUTSelect LOG OUT button and DVR will go in logged out status.You cannot control DVR and change settings of DVR in logged out status. In order to log in again, press anybutton of remote control or front key or click mouse button on any spot of screen.NOTE: When DVR goes in logged out status, all channel might be blocked by covert according to settingsin [System ‐> USER‐> Monitor ‐> ON] |
manualsdatabase
Your AI-powered manual search engine