EAE SW104 Product Manual
                       | |
Product Manual SW108 and SW104EAE KNX Switch Actuator PM R2.0©EAE Technology www.eaetechnology.com Page 2 / 221 GeneralEAE KNX Switch Actuator has eight channels which can be configured with ETS3/ETS4 or higherversion. Each channel is independent of another. It has a separate bistable switching relay. SW108 /SW104 has been designed especially for loads with high surge currents. It has 16A/20AX (C-Load)relays inside channels. C-Load feature enables a convenient control of fluorescent lambs. Also devicehas a manual operating feature. The relay can be switched on or off with slide switches.The following function list provides;• Staircase• External logic• Internal logic• Priority• Threshold• Operating hour• SweepEach channel of devices can choose any of these functions. The outputs are parameterizedindividually via ETS3/4. After bus voltage failure or voltage return the relay position is selected ondependence on the parameterization. In “ETS reset”, device parameters are return downloadconfiguration.NOTE: Each channel is uniform. Device factory default physical address is 15.15.255. |
Related manuals for EAE SW104
manualsdatabase
Your AI-powered manual search engine