EAREBEL SF543/BTS Instruction Manual
Also see for SF543/BTS: Instruction manualInstruction manual
                      | |
EN 16 17 ENInserting Headphones1 Get the headphones ready with the earebel lettering for theright side and the e logo for the left side.Only for models with a slot in the innerfleece strip:Insert the headphone with the ear cushionpointing upwards through the slot in thefleece. Slide it up to the round opening inthe hat; it is essential that you note the leftand right side here.2 3Guide the headphone out from the inside ofthe hat/headband through the round open-ing.4Press the bulge on theedge of the openinginto the headphone.6 Repeat steps 1 to 4 with the secondheadphone on the other side.7 Now connect the earebel to your smart-phone or player and enjoy perfectsound!5Check that the head-phones fit correctly:The bulge shouldnot be visible.Correct! Wrong!(Similar to those shown.)Headphone Structure12431 Micro-USB socket for charging2 LED3 Microphone for making phone calls4 Soft-touch control padConnecting Headphones via Bluetooth ®1 To connect the headphones to a smartphoneor other Bluetooth ® -enabled device, press thePlay/Pause button (on the soft-touch controlpad) for 5 seconds until the LED light starts toflash alternately blue and red. The headphonescan now be located by the Bluetooth ® -enableddevice.2 Switch on Bluetooth ® on the Bluetooth ® -enableddevice.3 Search and select “Earebel” and connect thetwo devices.4 As soon as the headphones and the Bluetooth ® -enabled device have been connected, only theblue LED is lit.NOTE: To preserve the battery, the headphones switch off auto-matically if no Bluetooth ® connection exists for 5 minutes.Hold downfor 5 sec. |
Related manuals for EAREBEL SF543/BTS
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine