Sound when pressed The sound comes out when touch panel is pressed.Sound on release The sound comes out when touch panel is released.Kind of sound drop-down listThe sound can be selected from among Beep Sound, Asterisk, Exclamation,Question, Critical Stop, Default Sound, and Standard SoundNote: Please use “Sounds” in the control panel to set the condition of Asterisk, Exclamation,Question, Critical Stop, Default Sound, and Standard Sound.Back to driver default buttonThe sound setting is returned to driver default setting.(Sound disabled,Sound when pressed ,Beep Sound , Frequency:1000Hz , Beep time:50ms)Set it as user default buttonPresent sound settings are preserved as standard setting. Contentspreserved are displayed in the column of "User default setting".Set as user default buttonBack to user default setting according to preserved condition.5.4. Touch sensitivity set-upSingle Monitor Dual Monitor(Plug and Play Device) Non-Plug and Play DeviceOperate modeStream modeThe coordinates value is continuously output until touch panel turns to off.Point modePoint operation. Turning off is notified immediately after turning on isnotified. Even if touch continues at the following, no data is output.Chapter 5 29