Eaton 2400 Series Installation & Maintenance Instructions Manual

Contents

EATON Installation & Maintenance Instructions IMI+70-XF-XC-XP-XT Issue 7© 2016, Eaton Page 14 of 21Fig.14 Gaining access to the XP and XT Base junction box230VAC NSWITCH L 24VACPUMP SUPPLYDATA A +DATA B -N 24VACPUMP SUPPLYEARTH230VAC LVIDEO SCREENVIDEO SIGNAL110VAC NSWITCH L 24VACPUMP SUPPLYDATA A +DATA B -N 24VACPUMP SUPPLY110VAC LVIDEO SCREENVIDEO SIGNAL24VAC NSWITCH L 24VACPUMP SUPPLYDATA A +DATA B -N 24VACPUMP SUPPLY24VAC LVIDEO SCREENVIDEO SIGNAL230VAC MODEL WITH PUMP OUTPUT110VAC MODEL WITH PUMP OUTPUT24VAC MODEL WITH PUMP OUTPUT230VAC NDATA A +DATA B - 230VAC LVIDEO SCREENVIDEO SIGNAL110VAC NDATA A +DATA B - 110VAC LVIDEO SCREENVIDEO SIGNAL24VAC NDATA A +DATA B - 24VAC LVIDEO SCREENVIDEO SIGNAL230VAC MODEL WITH NO PUMP OUTPUT110VAC MODEL WITH NO PUMP OUTPUT24VAC MODEL WITH NO PUMP OUTPUTNCEARTHNCEARTHNCEARTHEARTHEARTH110VAC N110VAC L110VAC FIBRE OPTIC MODEL230VAC N230VAC L23VAC IP MODELNCEARTH EARTHRJ45 INLINECONNECTORETHERNETVARIOUS FIBREBULKHEAD CONNECTORSFIBRECaution should be taken when removing and inserting the cable entry flange to avoidinternal cable becoming snagged on corners or screws.THE CABLE ENTRY FLANGE SHOULD NEVER BE REMOVED WHEN THE UNIT IS ENERGISED3.4.2 XP & XT Common Connection ExamplesAlways refer to project specific drawings and information