Eaton 5E700UD-KR Advanced User's Manual

Also see for 5E: Quick start guide Manual Manual Quick start guide User manual

74.2 Recommended positionsPlace the Eaton 5E on a flat, stable surface in its final location. Always keep 6” or150 mm of free space near UPS openings for ventilation.Installation in tower position4.3 UPS connection4.3.1 Power supply connectionCheck that the indications on the name plate located on the back of the UPScorrespond to the AC-power source and the true electrical consumption ofthe total load.Connect the UPS to the AC-power source with cable through a wall outlet equippedwith an earth connector, using your equipment cord.1. Disconnect the protected equipment, keep the power cable2. Connect IEC cable on protected equipment side.3. Connect IEC cable provided on UPS AC output side4. Connect the power cable to UPS AC inlet5. Connect the power cable to wall outlet