Eaton 5P1000RC Installation And User Manual

Also see for 5P1000RC: Installation and user manual

Page 25P 750VA-1.5 KVA US_ENCertification StandardsUninterruptible power systems (UPS) directives:•IEC 62040-1: General and safety requirements for UPS•IEC 62040-2: Electromagnetic compatibility (EMC) requirements•IEC 62040-3: Method of specifying the performance and test requirements. IEC 62040-4: Environmental aspects - Requirements and reportingCE markCE compliance contact: Eaton I.F. – 110 rue Blaise Pascal – 38330 Montbonnot Saint Martin - FranceThe EC Declaration of Conformity is available upon request for products with a CE mark.For copies of the EC Declaration of Conformity, contact Eaton Power Quality or check Eaton website:www.powerquality.eaton.comClass B emission level CISPR 22(EN 55022)Harmonics emission: IEC 61000-3-2Flickers emission: IEC 61000-3-3FCC 47 CFR Part 15, Subpart B - Unintentional Radiators Class BSpecial symbolsThe following are examples of symbols used on the UPS or accessories to alert you to importantinformation:RISK OF ELECTRIC SHOCK - Observe the warning associated with the risk of electric shock symbol.Important instructions that must always be followed.Do not discard the UPS or the UPS batteries in the trash.This product contains sealed lead acid batteries and must be disposed as it's explain in this manual.For more information, contact your local recycling/reuse or hazardous waste center.This symbol indicates that you should not discard waste electrical or electronic equipment (WEEE)in the trash. For proper disposal, contact your local recycling/reuse or hazardous waste center.Information, advice, help.