Eaton 5S 850 Installation And User Manual

Contents

8 614-06819-007. OperationBattery chargeThe UPS charges the battery as soon as it is connected to the AC outlet, whetherbutton 6 is pressed or not. When used for the first time, the battery will only provideits maximum autonomy after it has been charged for 8 hours. It is recommended thatthe UPS be permanently connected to the AC power supply to ensure the best possibleautonomy.Switching-on the UPSPress button 6 for about 1 second.Filtered outlets 18 without battery backupEquipment connected to these outlets is supplied as soon as the AC cord 4 is pluggedin. They are not affected by button 6 .Battery backup outlets 19Equipment connected to these outlets is supplied as soon as button 6 turns green(see figure D).These outlets can be turned on even if the UPS is not connected to AC power(button 6 flashes).6. UPS setting through the LCDl LCD shut off if any button inactive for 3 minutes.5s 2s 2s 2s 2s(184 - 264 V)Output voltage Input voltagetoleranceEcoControl Alarm(161 - 284 V)Release scroll down button to select menuSave the new value10s 5s 5sExample of setting

/ 10

Related manuals for Eaton 5S 1200