Eaton 9130 Series Firmware Upgrade Instructions

9130 firmware upgrade guide 1028349 Rev. P4 2012, Eaton Corporation Page 3 of 11Quick reference1. Shutdown the devices supported by the UPS.2. Ensure the UPS is in Standby state (output off).3. Set communication speed of RS-232 port (and USB) in the UPS to9600bps: Settings User Settings Serial Port ConfigurationPort: RS232, Speed: 9600.4. Connect RS-232 cable between the computer and the UPS.5. Start Watcher - UpsFlash software.6. Select COM port and Bit Rate 9600bps and press “Open”7. Press “Open File”, and select an “S” file to be flashed (e.g. V1.22.S).8. Press “Flash Normal” and unplug input power cord from the UPS.9. Wait until “Flash ok” notice will appear and press “Close” button.Main (DSP) firmware upgrade via RS-232