Eaton 93E User And Installation Manual

Also see for 93E: Installation and operation manual Operation manual Installation and operation manual Installation and operation manual Instructions

Contents

P-164000427 SMALL and LARGE BATTERY CABINET 12Revision 2 User's and Installation GuideCable connection to battery poles is to be done as follows:Figure 2 -5: Cable connection on b attery poles9. If multiple cabinets are to be used, repeat the steps for the rest of the cabinets andin 93PM system be sure to daisy chain the signal wire harnesses in the nextcabinet. 93E system does not use signal wiring. Signal wires are daisy chaine dby cutting the multiple connector and extra length of the cables and connecting them toTB2 terminals 5-8. Look at the Figure 2-6.Figure 2 -6: Signal wiring of Large and Small Battery Cabinet .