INS #Brand Logoreversed out ofblackINS #697916WARNINGRisk of fire/electric shock. If not qualified, consult anelectrician.WARNINGRisk of Electric Shock – Disconnect power at fuse orcircuit breaker before installing or servicing.WARNINGRisk of Burn – Disconnect power and allow fixture tocool before servicing.WARNINGRisk of Personal Injury – Fixture may become damagedand/or unstable if not installed properly.•• Do not mount luminaire within 6” of acombustible surface.•• Do not handle luminaire by the glass. Do nottouch LEDs.INS #IB506001ENIMPORTANT: Read carefully before installing fixture.Retain for future reference.General: Upon receipt of the fixture, thoroughly inspectfor any freight damage which should be brought to theattention of the delivery carrier. Compare the catalogdescription listed on the packing slip with the fixture labelon the housing to assure you have received the correctmaterial.Safety: This fixture must be wired in accordance withthe National Electrical Code and applicable local codesand ordinances. Proper grounding is required to insurepersonal safety. Carefully observe grounding procedureunder installation section.WARNINGMake certain power is OFF before starting installationor attempting any maintenance.Installation Instructions – Galleon LED FloodlightInstructions d’installation – Projecteur à DEL GalleonInstrucciones de instalación de Lámpara LED Galleonotee:N These instructions do not claim to cover alldetails or variations in the equipment, procedure,or process described, nor to provide directionsfor meeting every possible contingency duringinstallation, operation or maintenance. Whenadditional information is desired to satisfy aproblem not covered sufficiently for user’s purpose,please contact your nearest representative.otee:N This lighting fixture has been shipped completewith one of several mounting options. Please followthe installation instructions specific to the catalogpart that you ordered.otee:N Care must be taken not to set lighting fixture downon optical lenses or lift the fixture in the lens area.otee:N Specifications and dimensions subject to changewithout notice.APPLICATIONS: This lighting fixture is designed foroutdoor lighting services, and should not be used in areaof limited ventilation or inside high ambient temperatureenclosures. It must be stored in a dry location prior toinstallation. Do not expose lighting fixture to rain, dust orother environmental conditions prior to installation andinsertion of photo control or shorting cap (if so equipped).Do not install the fixture near combustible materials orlocate next to airflow blocking surfaces within 6 inches.Best results will be obtained if installed and maintainedaccording to the following recommendations.