Eaton Cooper Power Series Installation Instructions Manual

Also see for COOPER POWER SERIES: Installation and operation instructions Installation instructions Installation instructions Installation and operation instructions Operation instructions

Eaton Cooper Power Series Installation Instructions Manual Manual pdf 1 page image

GeneralEaton's Cooper Power™ series 600 A, 35 kVClass PUSH-OP™ bushing adapter is a factoryas sembled LRTP and extender with a stainlesssteel shroud and tin-plated copper probe. It meetsall the requirements of IEEE Std 386™-2006standard – Separable Connector Systems.The PUSH-OP bushing adapter has a non-boltedconnection that eliminates any need for threadingand its associated problems.The device is used to cap a 600 A PUSH-OP typebushing tap interface with Eaton's Cooper Powerseries 200 A loadbreak interface allowing for livetesting and visible grounding. The 200 A tap issingle-phase switching and three-phase fault closerated. Used with an Eaton's Cooper Power series200 A insulated protective cap, M.O.V.E. arresteror grounding elbow, a PUSH-OP bushing adapterprovides a fully shielded, submersible unit.InstallationThe PUSH-OP bushing adapter is installedon a de-energized 600 A PUSH-OP bushinginterface using a clampstick. Refer to ServiceInformation S600-19-1 600 A 15, 25, and 35 kVClass PUSH-OP Bushing Adapter Cap InstallationInstructions for details. Installation of the factoryassembled LRTP and extender to the 600 APUSH-OP bushing requires no threading.Production testsTests are conducted in accordance with IEEE Std386™-2006 standard.• ac 60 Hz 1 Minute Withstand• 50 kV• Minimum Corona Voltage Level• 26 kVTests are conducted in accordance with Eatonrequirements.• Physical In spec tion• Periodic Dissection• Periodic Fluoroscopic Analysis600 A 35 kV class PUSH-OP™bushing adapterDeadbreak ConnectorsCatalog DataCA650056EN Effective May 2015Supersedes 600-58 February 2000COOPER POWERSERIES

/ 2

Related manuals for Eaton COOPER POWER SERIES