Eaton Cooper Power Series Installation Instructions Manual

Also see for COOPER POWER SERIES: Installation and operation instructions Installation instructions Installation instructions Installation and operation instructions Operation instructions

Eaton Cooper Power Series Installation Instructions Manual Manual pdf 1 page image

GeneralEaton's Cooper Power™ series insulatedprotective cap is an accessory devicedesigned to electrically insulate andmechanically seal loadbreak bushing inter-faces. When mated to a loadbreak productand the drain wire is attached to ground,the insulated protective cap provides a fullyshielded, submersible insulating cover forenergized bushings. The cap can be usedfor permanent or temporary installation onbushings, junctions or feedthru devices thatmeet the requirements of IEEE Std 386™-2006 standard.InstallationNo special tools are required. A shotgunstick tool is used to place the protective capon an exposed bushing interface. Refer toService Information S500-21-1 200 A 15, 25,and 35 kV Class Insulated Protective CapInstallation Instructions for details.Production testsTests are conducted in accordance withIEEE Std 386™-2006 standard.• AC 60 Hz 1 Minute Withstand• 34 kV• Minimum Corona Voltage Level• 11 kVTests are conducted in accordance withEaton requirements.• Physical Inspection• Periodic Dissection• Periodic Fluoroscopic Analysis200 A 15 kV class insulatedprotective capLoadbreeakConnectorsCA650076EN Effective November 2015Supersedes 500-21 April 1996COOPER POWERSERIES

/ 2

Related manuals for Eaton COOPER POWER SERIES