Eaton Crouse-Hinds GHG511 Series Operating Instructions Manual

Also see for Crouse-hinds series: Operating instructions Instruction manual Operating instructions Operating instructions Instruction manual

Contents

Eaton Crouse-Hinds GHG511 Series Operating Instructions Manual Manual pdf 9 page image

99Cable entry: (catalogue version)Wall socket 2 x M25 1 x M25 + 1 x screwed blanking plugSuitable cables and test torques of the pressure screw (Ømm/Nm)(Default plastic KLE GHG960) M20 M25 M32Seal 1+2+3 1 2 3 min.max. (2) 5.5/1.57.0/1.08.0/1.510.0/2.0Seal 1+2 1 2 3 min.max. (2) 7.0/1.59.0/1.410.0/2.313.0/2.614.0/3.017.0/4.0Seal 1 1 2 3 min.max. (2) 9.5/1.013.0/1.713.5/1.317.5/2.317.5/1.521.0/1.3Test torque for screw in thread cable entry (Nm) 2.7 3.0 5.0(2) The tests of clamping ranges and torque values were performed with metal mandrel. The clamping range can vary by using cables with different manufacturing tolerancesand material properties. Please use a suitable combination of seals in the intermediate area, so that the cap nut can be tightened in future maintenance work on the cableentry.Suitable cables Supply terminals /Clamping range: Stripped wire lengthWall socket / Flange socket 2 x 1.5 - 4.0 mm2 10 mmPlug 3-pole Ø 8 - 18 mm 1 x 1.5 - 4.0 mm² (3) (4) 9 mmCoupler 3-pole Ø 8 - 19 mm 1 x 1.5 - 4.0 mm² (3) 10 mmPlug / Coupler 4-pole Ø 8 - 21 mm 1 x 1.5 - 4.0 mm² (3) (4) 9 mm / 10 mmPlug / Coupler 5-pole Ø 12 - 21 mm 1 x 1.5 - 4.0 mm² (3) (4) 9 mm / 10 mmPlug GHG 543/531 Ø 9 - 17 mm 1 x 1.0 - 4.0 mm2 8 mm(3) only with pin cable lugs(4) observe Perm. ambient temperature!Test torques:Supply terminals Wall socket / Flange socket 2,5 NmCoupler 2,5 NmPlug 1,5 NmCover screws 2.5 NmTerminals 2.5 NmMounting screws flange socket 1.6 NmSelf-cutting screws size 4 1.6 Nm (Page 15: Fig. 3; Pos. 3)Locking screw for pressure piece GHG 54 1.6 NmWeight: (catalogue version)Wall socket 3-pole GHG 511 43 approx. 1.10 kgPlug 3-pole GHG 511 73 approx. 0.27 kg / GHG 543 - approx. 0.23 kgCoupler 3-pole GHG 511 33 approx. 0.61 kgFlange socket 3-pole GHG 511 83 approx. 0.38 kgWall socket 4-pole GHG 511 44 approx. 1.50 kgPlug 4-pole GHG 511 74 approx. 0.34 kg / GHG 531 - approx. 0.40 kgCoupler 4-pole GHG 511 34 approx. 0.89 kgFlange socket 4-pole GHG 511 84 approx. 0.53 kgWall socket 5-pole GHG 511 45 approx. 1.55 kgPlug 5-pole GHG 511 75 approx. 0.38 kg / GHG 531 - approx. 0.41 kgCoupler 5-pole GHG 511 35 approx. 0.89 kgFlange socket 5-pole GHG 511 85 approx. 0.58 kg1.1 Auxiliary contact1 Technical dataAuxiliary contact, rated voltage: 250 VACAuxiliary contact, rated current: AC / 5 A DC / 0.03 AExplosion protected plug and socket system 16 A,3-pole, 4-pole, 5-pole, GHG 511GB