Eaton Cutler-Hammer CA03310002E User Manual
                        | |
September 2003CA03310002E For more information visit: www.cutler-hammer.eaton.com11NEMA Contactors & StartersIT. Electro-MechanicalTechnical Data and SpecificationsTable 6. Specifications, continued Use Class B 75°C copper wire only (or 90°Ccopper wire sized for 75°C operation perNEC). Consult factory for higher ratings. The Non-reversing Starter requires the useof all six mounting screws for the maximumrating.Note: At other temperatures expressed in°C, for either inrush or sealed, use the 20°Cvalue from the table in the followingDescription Size 00, 0 Size 1 Size 2 Size 3, 4 Size 5Finger ProtectionFront IP20 IP20 IP20 IP20 IP20At Terminals IP10 IP10 IP00 IP00 IP00At Terminals with max.size wire installedIP20 IP10 IP10 IP00 IP00Terminals L1, L2, L3/T1, T2, T3 1 Wire per Terminal(stranded or solid)14 – 8 AWG(1.5 – 10 mm2)14 – 4 AWG(1.5 – 16 mm2)14 – 1 AWG(1.5 – 35 mm2)6 – 250 MCM(16 – 120 mm2)4 – 750 MCM(25 – 420 mm2)2 Wires per Terminal(stranded or solid)14 – 10 AWG(1.5 – 4 mm2)14 – 6 AWG(1.5 – 16 mm2)14 – 2 AWG(1.5 – 25 mm2)6 – 3/0 AWG(16 – 70 mm2)1/0 — 300 MCM(50 — 150 mm2)Strip Length .45" (11 mm) .5" (12 mm) .7" (18 mm) .8" (21 mm) 1.5" (40 mm)Torque (max.) 20 lb-in (2.2 Nm)for 14 – 10 AWG(1.5 – 6 mm2);25 lb-in (2.8 Nm) for8 AWG (10 mm2)35 lb-in (4.0 Nm)for 14 – 10 AWG(1.5 – 6 mm2);40 lb-in (4.5 Nm) for8 AWG (10 mm2);45 lb-in (5.0 Nm) for6 – 4 AWG(16 mm2)45 lb-in (5.0 Nm) forSingle 14 – 8 AWG(1.5 – 10 mm2);100 lb-in (11 Nm) forSingle 6 – 1 AWG(16 – 35 mm2) andDual WireCombinations250 lb-in (28 Nm) 550 lb-in (62 Nm)Driver 2.5 mm Hex Key 3 mm Hex Key 5/32" (4 mm) Hex Key 5/16" (8 mm) Hex Key 5/16" (8 mm) Hex KeyOperation PerformanceCoil Voltage (nominal) 24V DC 24V DC 24V DC 24V DC 24V DCCoil OperatingVoltage Range (V DC)20 – 28 20 – 28 20 – 28 20 – 28 20 – 28Control Terminals(- and +)1 Wire per Terminal14 – 12 AWG(1.5 – 2.5 mm2)14 – 12 AWG(1.5 – 2.5 mm2)14 – 12 AWG(1.5 – 2.5 mm2)14 – 12 AWG(1.5 – 2.5 mm2)14 – 12 AWG(1.5 – 2.5 mm2)(- and +)2 Wires per Terminal14 AWG(1.5 mm2)14 AWG(1.5 mm2)14 AWG(1.5 mm2)14 AWG(1.5 mm2)14 AWG(1.5 mm2)(P, F, R, 1, 2, 3)1 Wire per Terminal22 – 12 AWG(0.5 – 2.5 mm2)22 – 12 AWG(0.5 – 2.5 mm2)22 – 12 AWG(0.5 – 2.5 mm2)22 – 12 AWG(0.5 – 2.5 mm2)22 – 12 AWG(0.5 – 2.5 mm2)(P, F, R, 1, 2, 3)2 Wires per Terminal18 – 14 AWG(0.75 – 1.5 mm2)18 – 14 AWG(0.75 – 1.5 mm2)18 – 14 AWG(0.75 – 1.5 mm2)18 – 14 AWG(0.75 – 1.5 mm2)18 – 14 AWG(0.75 – 1.5 mm2)Torque (max.) 4.5 lb-in (.5 Nm) 4.5 lb-in (.5 Nm) 4.5 lb-in (.5 Nm) 4.5 lb-in (.5 Nm) 4.5 lb-in (.5 Nm)Strip Length .25 (7 mm) .25 (7 mm) .25 (7 mm) .25 (7 mm) .25 (7 mm)Driver .13 (3.5 mm) Flat .13 (3.5 mm) Flat .13 (3.5 mm) Flat .13 (3.5 mm) Flat .13 (3.5 mm) FlatTemperature Operating -40° to +149°F(-40° to +65°C)-40° to +149°F(-40° to +65°C)-40° to +149°F(-40° to +65°C)-40° to +149°F(-40° to +65°C)-40° to +149°F(-40° to +65°C)Storage -58° to +176°F(-50° to +80°C)-58° to +176°F(-50° to +80°C)-58° to +176°F(-50° to +80°C)-58° to +176°F(-50° to +80°C)-58° to +176°F(-50° to +80°C)EnvironmentalShock/Vibration 15G/5G 15G/5G 15G/5G 15G/5G 15G/5G Altitude 6600 FT (2000M) 6600 FT (2000M) 6600 FT (2000M) 6600 FT (2000M) 6600 FT (2000M)Pull-In Time (mS) @ 24VExcl. Debounce Time 15 15 25 30 70 – 200Incl. Debounce Time 75 80 88 95 120 – 300Dropout Time (mS) @ 24VExcl. Debounce Time 5 5 12 15 50 – 150Incl. Debounce Time 65 70 75 80 70 – 250Watts = W20 [1.1 – .005(T) andAmps = A20 [1.1 – .005(T)]For example, inrush requirements for a NEMASize 2 Starter at -25°C would be:Watts = 130 [1.1 – .005 (-25)] = 160Amps = 5.4 [1.1 – .005 (-25)] = 6.6Notes: Response time for Control Inputs = DebounceTime The time between operating forward andreverse must be greater than the DebounceTime.Table 7. 24V DC Power Supply Requirements @ 68°F (20°C) (see Note at left) _ indicates missing digit/character of the Catalog Number; may have multiple values.Contactor/Starter Size Sealed In InrushCatalogNumber NEMA Size Wattage Amps Wattage Amps Duration(mS)N_11B_ _X3NN_01B_ _ _3AN_11C_ _X3N00, 000, 013.73.24.2.15.13.188080903.33.33.8505050N_01C_ _ _3AN_ _1D_ _ _3_N_ _1E_ _ _3_N_ _1F_ _ _3_N_01F_ _ _3_123, 4553.65.05.612.013.0.15.21.23.50.54901301402002003.85.45.88.38.3506585250250 |
Related manuals for Eaton Cutler-Hammer CA03310002E
This manual is suitable for:
Cutler-Hammer CA03310002EEMUCCFN02NBXCXNNN02NCXCXNNN02NDXCXNNN02NEXCXNNN04NBS0X3NN04NBSAX3NN04NCS1X3NN04NDS2X3NN04NES3X3NN04NES4X3NN05NBXRA3AN05NBXRB3AN05NBXRC3AN05NBXRD3AN05NBXRG3AN05NBXRJ3AN05NCXRA3AN05NCXRB3AN05NCXRC3AN05NCXRD3AN05NCXRF3AN05NCXRH3AN05NCXRL3AN05NDXRF3AN05NDXRH3AN05NDXRK3AN05NDXRN3AN05NEXRK3AN05NEXRM3AN05NEXRP3AN05NFXRP3AN05NFXRS3AN05NFXRT3A
manualsdatabase
Your AI-powered manual search engine