Eaton Cutler-Hammer IQ 300 Series Instructions For Installation, Operation And Maintenance

Effective Date: 2/04IL17574CPage 4-1IQ 300Effective Date: 2/04 Page 4-1For more information visit: www.cutler-hammer.eaton.comSECTION 4: OPERATION4.1 GENERALThe IQ 300 Display Module provides both local display of system values and amethod of assigning an INCOM address to the IQ 320 and IQ 330, and a separateMODBUS address to the IQ 330 to enable communications.The IQ 300 Display Module allows the user to view information and to specify orchange the functions of the IQ 300 system. These items include system and phasedata, min/max data, set points and screen contrast.It also provides a method of assigning a network address and communication baudrate to the IQ 320 and IQ 330 Base variation, should it be networked to a PowerNetmaster device.All functions of the IQ 300 are available through menus visible on the screen of theIQ 300 Display Module Operator Panel. Choice of menu and selection of menuoptions is accomplished by pressing the buttons on the face of the Operator Panel.The screen of the IQ 300 is divided into four sections. The numeric top row thatallows you to read the numerical value of what you have chosen. The alphanumericdigits on the bottom row describes the value. The center row of words tells youwhich menu and which branch of menu you are in. These words can be used aloneor in combination with each other. For example if the maximum phase A current isbeing displayed both the Phase and Max words will be displayed. The lower rightcorner of the display has 3 icons. The arrow is on when up is a valid path andFigure 4.0 IQ 300 Screen