Pow-R-Command 750 — LCD DisplayQuick Start GuideInstruction Leaflet IL01412018EEffective February 2009IntroductionThis is the Quick Start Guide for the PRC750 LCD programmingdisplay. A worksheet of information that will be needed to completethis startup is found on Page 11 of this guide. Make sure you have allthe listed information available before starting, either by filling in theworksheet, or from job documents.Several conventions are used in this document. COURIER textindicates screen output or screen menu items. BOLD COURIERindicates user button presses.Navigation through the LCD programming menus is via the fourbuttons to the right of the screen as shown above. They are BACK,UP, DOWN and SEL. Generally, BACK is used to cancel a selection orto move back up through the menu hierarchy. UP/DOWN are used toscroll through selections on a menu or to change values. SEL is usedto choose a menu item or to enter a setting. Some menu screens willhave an arrow symbol () in the lower right corner. This indicatesthere are additional menu items for this screen. Use the UP/DOWNkeys to scroll down to view the additional items.FIGURE 1. CONTROLLABLE CIRCUIT BREAKEREaton’s Cutler-Hammer controllable circuit breakers have twohandles, as shown in Figure 1. The larger black handle is referredto as the primary handle. The primary handle can be turned to theON or OFF positions by manual control. The smaller green handle isreferred to as the control handle. The control handle can be moved tothe ON or OFF position by electronic control or to the ON position bymanual override.Primary HandleControl Handle

Eaton Cutler-Hammer Pow-R-Command 750 Quick Start Manual