Eaton DET-RSMOKE Manual
                        |
10enough signal for any receiver. All these considerations come into play in the followingrecommendations:To ensure that the detector can detect any smoke:• Place detectors high up, in spaces where smoke accumulates.• On flat ceilings place the detector close to the middle of the ceiling. On pitchedceilings place the detector on the slope of the ceiling, at least one metre from thetop.• If you cannot place a detector on a ceiling, then mount one as high as possible on awall, but at least 100mm away from the ceiling.• Place detectors at the top of stair wells.To ensure that people can hear the audible alarm:• Place a detector on the landing outside bedrooms. The sound level of the alarminside the bedrooms must be enough to wake a sleeper.• Place at least one detector on every floor of the house.To ensure that receivers can pick up radio signals from the DET-RSMOKE:• Place detectors high up.• Place detectors clear of any metalwork.• Place detectors clear of any other radio transmitter.• Read “Guidance Notes for Wireless Alarm System Installations” carefully for moredetailed information. |
Related manuals for Eaton DET-RSMOKE
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine