Eaton EBPLED7W Instructions Manual

Eaton EBPLED7W Instructions Manual Manual pdf 1 page image

IB505009ENInstructions for Surelites LED Emergency Battery PacksIncludes the following model numbers: EBPLED7W, EBPLED14WWARNINGRisk of Electric ShockDisconnect power at fuse or circuit breaker beforeinstalling or servicing.WARNINGRisk of Fire/Electric ShockIf not qualified, consult an electrician.Important SafeguardsWHEN USING ELECTRICAL EQUIPMENT, BASIC SAFETYPRECAUTIONS SHOULD ALWAYS BE OBSERVED INCLUDINGTHE FOLLOWING.1. READ AND FOLLOW ALL SAFETY INSTRUCTIONS2. Do not use outdoors.3. Do not mount near gas or electric heaters4. Equipment should be mounted in locations and at adequateheights to prevent tampering by unauthorized personnel.5. The use of accessory equipment not recommended byEaton may cause an unsafe condition and will void thewarranty.6. Do not use this equipment for other than its intendedpurpose.7. Not for use with sealed and gasketed fixtures8. SAVE THESE INSTRUCTIONSNOTES1. To prevent voltage from being present on the output wires(Red/White & Blue/White), do not connect the test buttonassembly to the EBP or insure the EZ key is securely inplace.2. This product is for use with LED fixtures that have LEDloads capable of the output wattage and that have LEDforward voltage within the ranges below.Output Power (W) Min Vf (V) Max Vf (V)All 7 WattVersions 7 8 55All 14 WattVersions 14 16 553. Make sure all of the connections are in accordance withthe National Electrical Code and any local regulations.4. To reduce the risk of electrical shock, disconnect bothnormal and emergency power supplies and the test buttonindicator light (which disconnects the battery) beforeservicing. Insuring the battery disconnect is securely inplace also prevents battery powered operation.5. These emergency ballasts can be field or factory installeddepending on version. See mounting section for details.6. This product is for use in indoor fixtures only. Do NOTuse near heated air handling outlets, wet locations orhazardous locations.7. An un-switched AC power source is required. (120 - 277volts 50/60 HZ) for proper operation.8. Do not attempt to service the battery. The sealed,no-maintenance battery is not field replaceable. Contactthe manufacturer for information on service.9. All maintenance should be performed by qualified servicepersonnel.FEATURESThis emergency battery pack (EBP) includes extra featureswhich enhance its operation and maintainability.1. Patented EZ key battery disconnect: When the EZ key isinserted into the test button, the battery is disconnected.This feature prevents unnecessary cycling of the batteryduring the construction process. It can also be used if theroom is decommissioned for an extended period of time toprevent the batteries from being over discharged.2. Patent pending Test Button / Indicator Light / Laser Input:The test button houses the EZ key, powers the indicatorlight, contains the laser input for testing and functions asthe mechanical test button. Integration of these functionsimproves performance and fixture aesthetics.Sure-LitesCONTAINS NICKEL-CADMIUMRECHARGEABLE BATTERY.MUST BE RECYCLED ORDISPOSED OF PROPERLY. Ni - CdFor use intemperature rating0°C to 55°CEBPLED Class 2 Output

/ 2

Related manuals for Eaton EBPLED14W