Eaton Metalux Installation Instructions Manual

Also see for Metalux: Installation instructions Installation instructions

Eaton Metalux Installation Instructions Manual Manual pdf 1 page image

INS #Brand Logoreversed out ofblackINS #IB519013ENInstallation Instructions - Steeler LED Battery PackInstructions d’installation - Bloc-piles à DEL SteelerInstrucciones de instalación - Paquete de baterías LED SteelerWARNINGRisk of fire, electrical shock, cuts and or other casualtyhazards. This product must be installed in accordancewith the applicable installation code by a qualifiedelectrician or a person familiar with the constructionand operation of the product and the hazards involved.Eaton assumes no responsibility for claims broughtabout by improper or careless installation or handlingof this product.WARNINGRisk of Fire and Electric Shock. If not qualified, consultan electrician.CAUTIONEdges May Cut. Handle with care.CAUTIONRisk of burn. Disconnect power and allow fixture to coolbefore changing bulb or handling fixture.NOTICE: Minimum 90° supply conductors.NOTE: Specifications and dimensions subject to changewithout notice.IMPORTANT: Read carefully before installing fixture. Retain for future reference.ATTENTION Receiving Department: Note actual fixture description of any shortage or noticeable damage on deliveryreceipt. File claim for common carrier (LTL) directly with carrier. Claims for concealed damage must be filed within 15days of delivery. All damaged material, complete with original packing must be retained.INSTALLATIONBattery Pack Installation1. Mount luminaire and remote battery pack (usehardware appropriate for the structure the battery isinstalled, not provided with the fixture) (Figure 1).2. Suspended luminaire a minimum of 12” from theceiling and position the battery pack off-center from thefixture.Figure 1.Review instructions provided bythe battery pack manufacturerHardware(supplied byothers)Remote Battery Pack