Eaton ELC Series Instruction Sheet

Also see for ELC Series: Instruction sheet Operation manual

- 5 -restart its operation (RUN). Electrical SpecificationsModelItem ELC-PV28NNDR ELC2-PV28NNDR ELC-PV28NNDT ELC2-PV28NNDTELC2-PV28NNDPPower supplyvoltage 24 Vdc (-15% ~ 20%) (with reverse polarity protection on the DC input power)Inrush current Max. 2.2A@24 VdcFuse capacity 2.5A/30 Vdc, PolyswitchPowerconsumption 6WInsulationresistance > 5MΩ (all I/O point-to-ground: 500 Vdc)NoiseimmunityESD (IEC 61131-2, IEC 61000-4-2): 8kV Air DischargeEFT (IEC 61131-2, IEC 61000-4-4): Power Line: 2kV, Digital I/O: 1kV, Analog& Communication I/O: 1kVDamped-Oscillatory Wave: Power Line: 1kV, Digital I/O: 1kVRS (IEC 61131-2, IEC 61000-4-3): 26MHz ~ 1GHz, 10V/mGroundingThe diameter of grounding wire shall not be less than that of the wiringterminal of the power. (When ELCs are in use at the same time, please makesure every ELC is properly grounded.)Operation /storageOperation: 0ºC ~ 55ºC (temperature); 5 ~ 95% (humidity);pollution degree 2Storage: -25ºC ~ 70ºC (temperature); 5 ~ 95% (humidity)AgencyapprovalsUL508European community EMC Directive 89/336/EEC and Low Voltage Directive73/23/EECVibration /shockimmunityInternational standards: IEC61131-2, IEC 68-2-6 (TEST Fc)/IEC61131-2 &IEC 68-2-27 (TEST Ea)Weight (g) 260 260 240 240(T)230(P)Input Point24 Vdc single common port inputSpec.Items 200kHz 20kHz 10kHzInput No. X0, X1, X4, X5 X10, X11, X14, X15 X2, X3, X6, X7, X12,X13, X16, X17Input voltage(±10%) 24 Vdc, 5mAInput impedance 4.7kΩ 3.3kΩ 4.7kΩOffOn > 4mA (16.5V) > 6mA (18.5V) > 4mA (16.5V)Action level OnOff < 1.5mA (8V) < 2.2mA (8V) < 1.5mA (8V)OffOn < 150ns < 3.5μs < 8μsResponse time OnOff < 3μs < 20μs < 60μsFilter time Adjustable within 10 ~ 60ms by D1020, D1021 (Default: 10ms)Output PointTransistor (NPN, PNP)Spec.Items Relay High-speed Low-speedOutput No. Y0 ~ Y7, Y10 ~ Y13 Y0 ~ Y4, Y6 Y5, Y7, Y10 ~ Y13Max. frequency 1Hz 200kHz 10kHzWorking voltage 250 ac, < 30 Vdc 30 VdcMax. load Resistive 1.5A/1 point(5A/COM) 0.3A/1 point @ 40°CInductive ＃1 9W (30 Vdc)Max. load Lamp 20WDC/100WAC 1.5W (30 Vdc)OffOn 0.2μs 20μsResponsetime OnOff Approx. 10ms 0.2μs 30μs