Eaton EM4PBLSC Installation Instructions Manual

Eaton EM4PBLSC Installation Instructions Manual Manual pdf 1 page image

MEMSHIELD 4 INSTALLATION INSTRUCTIONS FOREM4PBLSC LIVE SIDE CONNECTION (up to 125A)Instruction leaflet LT1226 (02/19)IMPORTANT NOTES1. This product should be installed, commissioned and maintained by or under the supervision of a competent electrician inaccordance with current electrical engineering Codes of Practice, Requirements for the Electrical Installations (IET WiringRegulations BS7671), Construction (Design and Management) Regulations, HSG150 - Health and Safety in Construction, Statutoryrequirements and any Specific instruction issued by the Company.2. After completing the installation and testing of this product it is essential that this leaflet is drawn to the attention of theperson responsible for its future operation and maintenance, and is at all times available for ready reference.3. These notes assume throughout that the product is disconnected from the supply. It is essential that this is done before anywork is carried out.4. These Panelboards are only designed for use with Eaton MCCBs. Failure to comply will result in invalid warranty andcertification.Items Supplied in Live Side Connection KitM8 x 16mm Hex Head Bolt DIN934 Grade 8.8 4 QtyM8 CONICAL SPRINGWASHER DIN6796 4 QtyCopper Connectors - 25 x 3mm 4 QtyCaution Label 1 QtyItems required for Live Side ConnectionDouble Insulated Cable – length and rating as required 4 Qty – To feed the Exel 2M8 Cable Lugs - rating as required 4 Qty – To connect the live side connectorCable Ferrule - rating as required 4 Qty – To connect the cable to the Exel 2.Exel 2 – TPN Fuse Switch Disconnector – Rating as required 1 Qty – Eaton list numbers -M12 Incomer Cable lugs – See Incomer type for Lugs required (Page 2).LIVE SIDE CONNECTION - GENERAL ARRAGEMENT - UP TO 125AA live side connection, off the incoming MCCB, can be fitted using the supplied copper connectors.Double insulated cable is used to feed an Exel 2 TPN Fuse Switch disconnector enclosure.live side copperconnectorExel 2 TPN Fuse SwitchDisconnector.Padlockable in ON orOff position.PanelboardDouble Insulated CableLive side Connection20A TPN - 15KXTNC2F32A TPN - 30KXTNC2F63A TPN - 60KXTNC2F100A TPN - 100KXTNC2F125A TPN - 125KXTNC2FCaution Label - fitted on the Exel enclosureCAUTIONFED FROM LIVE SIDEOF PANELBOARDINCOMER

/ 2

Related manuals for Eaton EM4PBLSC