34008236EN/AC - Page 3IntroductionEnvironmental protectionEATON has implemented an environmental-protection policy.Products are developed according to an eco-design approach.SubstancesThis product does not contain CFCs, HCFCs or asbestos.PackingTo improve waste treatment and facilitate recycling, separate the various packing components.◗ The cardboard we use comprises over 50% of recycled cardboard.◗ Sacks and bags are made of polyethylene.◗ Packing materials are recyclable and bear the appropriate identification symbol .Follow all local regulations for the disposal of packing materials.End of lifeEATON will process products at the end of their service life in compliance with local regulations.EATON works with companies in charge of collecting and eliminating our products at the end of their service life.ProductThe product is made up of recyclable materials.Dismantling and destruction must take place in compliance with all local regulations concerning waste.At the end of its service life, the product must be transported to a processing centre for electrical and electronic waste.BatteryThe product contains lead-acid batteries that must be processed according to applicable local regulations concerningbatteries.The battery may be removed to comply with regulations and in view of correct disposal.Thank you for selecting an EATON product to protect your electrical equipment.The Evolution range has been designed with the utmost care.We recommend that you take the time to read this manual to take full advantage of the many features of your UPS(Uninterruptible Power System).Before installing Evolution, please read the booklet presenting the safety instructions. Then follow the indications inthis manual.To discover the entire range of EATON products and the options available for the Evolution range, we invite you tovisit our web site at www.eaton.com or contact your EATON representative.Material Abbreviation Numberin the symbolPolyethylene terephthalate PET 01High-density polyethylene HDPE 02Polyvinyl chloride PVC 03Low-density polyethylene LDPE 04Polypropylene PP 05Polystyrene PS 06
