Eaton FHF DSLB 20 LED Technical Manual

8DSLB 20 LED Beacon Technical ManualDSLB 20 LED BEACON TECHNICAL MANUAL TMF0053.A www.eaton.comCable glandType HIBM-X2S INMETROSize M20x1,5 mm / ISO 965-1, ISO 965-31 = 2 = 24 mmH = 30 mm L = 10 mmCable diameter Ø 7 mm … 12 mmTorques 5,0 Nm ± 0,5 / 12,0 Nm ± 0,5 / 2Temperature range -60 °C ≤ Ta ≤ +70 °CDegree of protection IP66, IP68 / ABNT NBR IEC 60529Marking Ex eb IIC GbEx tb IIIC DbCertificate DNV 18.0150 XCable glands are suitable for fixed installations only. The cables must be effectively fixed to prevent pulling or twisting.Specified torques must be observed. When tightening the cover 1, the side of the cable entry assembly closest to thehousing 2 must be protected against rotation.The disc mounted to prevent dust ingress should be removed during installation.All unused cable glands must be sealed with suitable insert plugs. When a previously installed insert tap is removed toinstall the proper cable, the sealing rings must be replaced with new ones (original replacement parts only).For installing in dusty environments: WARNING—POTENTIAL RISK OF ELECTROSTATIC CHARGE. Clean while wearingantistatic clothing only.Subject to changes or errors