Eaton Metalux SLSTP 8x8 Row Mount Bracket Installation Instructions Manual

INS #Brand Logoreversed out ofblackINS #IB519086ENInstallation Instructions – SLSTP 8x8 Row Mount BracketDirectives d’installation – Support en série 8x8 SLSTPInstrucciones de instalación - Soporte de montaje en hilera SLSTP8x8IMPORTANT: Read carefully before installing row mount bracket. Retain for future referenceWARNINGRisk of fire, electrical shock, cuts and or other casualtyhazards. This product must be installed in accordancewith the applicable installation code by a qualifiedelectrician or a person familiar with the constructionand operation of the product and the hazards involved.Eaton assumes no responsibility for claims broughtabout by improper or careless installation or handlingof this product.WARNINGRisk of Fire and Electric Shock. If not qualified, consultan electrician.CAUTIONEdges May Cut. Handle with care.CAUTIONRisk of burn. Disconnect power and allow fixture to coolbefore handling fixture.otice:N Minimum 90° supply conductors.otice:N Green ground screw provided in proper location.Do not relocate.ote:N Specifications and dimensions subject to changewithout notice.8x8 Row Mount Bracket1. Remove lens and channel cover as shown in Figure 1Figure 1