Eaton Industries (Austria) GmbH, Eugenia 1, A-3943 Schrems MA-PXS24_Standard.docx/04.2018www.eaton.eu/documentation 4 150501507d/IL019188ZUTechnical Manual (EN)PXS24… StandardThis manual describes the functioning of the Standard-series PXS24 and the “stand-alone” operation. The PXS24 systemallows for many possible combinations, which are described in detail in the “PXS24 system” manual.Up-to-date information and the most recent version of this document are available at:Eaton.com/PXS24We recommend downloading the latest versions of all relevant documents prior to planning.HAZARD WARN-INGSThe PXS24 series has been developed specifically for overload-protected and short-circuit proof 24 Vpower supply units, of the type commonly used in automation applications.Whenever the modules are switched on (i.e. when operating voltage is applied) they are live (provid-ed that the slide switch at the front is set to “I”)! If the unit has tripped (following an overload orshort circuit), switching it off and back on again will reset the trip.Please refer to the technical data of the individual components, particularly the operating voltage andthe rated current.THE PXS24 SYS-TEMThere are many different options for combining the various components of the PXS24 series. To avoidrestricting this flexibility, two separate series with different functionalities are available.1.) Economy: PXS24E-…2.) Standard: PXS24S-…Feature Economy StandardRated current 0-10A 0-16Aoverload protection x xModular design x x3 load outputs x xPush-in terminals x xBusbar (+/-) x xLocal status LED x xLocal control (on/off/reset) x xSubsequent control xDigital output (OK/tripped) xDigital input (on/off/reset) x