Eaton Power Xpert 9395P Installation Manual

Also see for Power Xpert 9395P: Installation and operation manual Installation and operation manual Installation and operation manual Installation and operation manual User and installation guide

FIELD INSTALLED UPM INSTALLATIONPower Xpert 9395P Field Installed UPM Mechanical Installation Manual P-164000503 Rev 1 4-54.4 Electrical InstallationInstall FI-UPM battery wiring from the battery cabinet to the FI-UPM battery terminallocation in the UPS (refer to the applicable UPS manual listed in paragraph 1.4 onpage 1-3). Wiring between the FI-UPM and the UPS, and FI-UPM battery terminalswill be installed by an Eaton Customer Service Engineer. This service is offered aspart of the sales contract for the FI-UPM. Contact an Eaton service representative inadvance (usually a two-week notice is required) to request service.4.5 Initial StartupStartup and operational checks must be performed by an authorized Eaton CustomerService Engineer, or the warranty terms specified on page W-1 become void. Thisservice is offered as part of the sales contract for the FI-UPM. Contact an Eatonservice representative in advance (usually a two-week notice is required) to reserve apreferred startup date.4.6 Completing the Installation ChecklistThe final step in installing the FI-UPM is completing the following InstallationChecklist. This checklist ensures that all hardware, cables, and other equipment havebeen completely installed. Complete all items listed on the checklist to ensure asmooth installation. Make a copy of the Installation Checklist before filling it out, andretain the original.After the installation is complete, an Eaton Customer Service Engineer must verifythe operation of the FI-UPM and UPS system and commission it to support the criticalload. The service representative will verify software and operating setup parameters.Service personnel may request a copy of the completed Installation Checklist to verifyall applicable equipment installations have been completed.NOTE The Installation Checklist MUST be completed prior to starting the FI-UPM and UPS system for thefirst time.