Eaton Power Xpert Branch Circuit Monitor Instruction Booklet

2Instruction Booklet IB150030ENEffective October 2020Power Xpert Branch Circuit Monitor6” tenant metering touchscreendisplay featuresEATON www.eaton.com1 IntroductionThe Eaton PXBCM Meter 6” Color Touchscreen Display(PXBCM-DISP-6-TM-XV) is pre-programmed to communicate withEaton PXBCM-MB Meters The programming allows access tobranch circuit monitor data and meters through the PXBCM meterbase The built-in navigation functions are simple and convenient,allowing easy navigation between screens The display has beendesigned to display overall system information for up to 42configured virtual meters and the main meter2 InstallationFor installation and connection information, please refer to “PXBCMmeter color touchscreen display quick start guide”(Eaton Pub TD150031EN)2.1 Meter sealing for regulated tenant metering applicationsThe PXBCM meter tenant metering touchscreen display providesa banner notifying users if their meter has not been set to eitherof the available secure modes Setting the PXBCM to a securedmode is required in regulated tenant metering applications For moredetails on permissions in each of the available secure modes offeredby the PXBCM, please refer to “PXBCM Install Guide”(Eaton Pub IB150003EN)Once the appropriate mode is set on the PXBCM meter base, thebanner will disappear and the meter can be sealedNo action is required on the displayFigure 1. Example of notification banner3 Using the touchscreen3.1 Basic navigationBasic navigation between the screens is accomplished by touch-ing the name of the screen or category area; the Back, Next, orPrevious arrows; or the Home icon Touching a screen name orcategory area will take the user to the screen or category selectedFigure 2. Navigating from the Home screen to Virtual MetersFigure 3. Location of the Back, Previous and Next arrowsTouching the Home icon, where available, will redirect the user tothe Home screen Touching the “Back” arrow will redirect the userto the previous category screen Touching the “Next” arrow will takethe user to the next data screen Touching the “Previous” arrow willtake the user to the previous data screen3.2 Home screenThe Home screen appears when power has been applied to thePXBCM 6” color touchscreen display and boot-up is complete The“Auth” box displays the authentication number of the meter TheHome screen displays major information about HMI and PX-BCMsuch as HMI serial number firmware version and IP address ofPX-BCMTouching the Meter Base Info or Module Info button will take theuser to screens with meter base or module information, respectivelyIn addition, the home screen also gives the user direct access to themeter These are accessed by touching the name area at the bottomof the screen At the top left corner, “Settings” buttonnavigates to the settings pageFigure 4. Home screen and location of Home iconBack Previous NextHome iconVirtual meters

/ 4

Related manuals for Eaton 786689397340