Eaton Power Xpert Gateway 900 Installing

Also see for Power Xpert Gateway 900: Quick start guide Quick start guide Installation, operation & maintenance manual

Contents

panel mounting

6 (152.4)Front View 4.5 (114.3)Side View2 (50.8)5.625 (142.875)1.625 (41.275)5.04 (128)2.56 (65)Top View6 (152.4)Front ViewRemove and then reattach thesescrews to rotate for vertical mounting1.97(50)2.023(51.402)0.556(14.12)Side ViewGnd +VGnd +V24 VDCSupplyGnd +VPower Xpert GatewayPower Xpert GatewayInstalling the Power Xpert Gateway 9001 Mounting2 Wiring1. Connect the two power supply leads froma 24 VDC, class 2 power supply to thetwo-pin Phoenix connector shipped withthe unit.2. Insert the connector into the powersocket marked 24VDC. The power LED(above the power socket) will light.Power Xpert Insight™GatewayCOM 1M 2USB to PC3 ConnectingYou can connect a PXG 900 to a PC via the USB A to USB Mini-B cable shipped with the gateway. You’llneed a USB driver for your PC to connect with the PXIG. You can download this and the product docu-mentation from http://eaton.com/PXG. To connect to the PXG 900 via the USB cable:1. Open a browser and navigate to: http://192.168.200.101.2. The default user name and password is admin.3. The Help menu leads to the user guides.Eaton Corporation877-ETN-CARE (877-386-2273)Eaton.com/pxg© 2014 Eaton CorporationAll Rights ReservedPrinted in USAJune, 2014MN152004ENPanel MountingDIN Rail MountingGroundingSee reverse side for importantsafety and warning statements.

/ 2

Related manuals for Eaton Power Xpert Gateway 900