PXES4P Switches Installation and User Guide (10/06)13Metal Mounting clips for panel mounting : includedDIN-Rail mounting option: Model :#PXESDINRLRack-mount option: #PXESTRAYMean Tine Between Failure (MTBF ) – 15+ years, Telcordia (Bellcore SR-332) MethodAgency Approvals and Standard Compliance:UL Listed (UL 60950), cUL, CE, Emissions meet FCC Part 15, Class A.NEBS L3 and ETSI compliantIEEE P1613 Env. Std for Electric Power SubstationsIEC61850 EMC and Operating Conditions Class C for Power SubstationsDesigned for above-the-ceiling (plenum) installationMade in USAPXES4P Switches Installation and User Guide (10/06)Examine the shipping container for obvious damage prior to installing thisproduct; notify the carrier immediately of any damage which you believe occurred during141.2 Summary of model and descriptions:PXES4P-Hd, Hi = Hardened, four 10/100 RJ-45 ports Switch, Factory floor, Int. 8-15VDC,Ext. AC Hardened power supply included .PXES4P-12VDC = Same as PXES4P model, except Ext. AC Hardened power supply not includedPXES4P24C = Same as PXES4P-12VDC model, except for 24VDC power inputPXES4PR-24VDC = Same as PXES4P-24VDC model, but includes PXESDINRL option.PXES4P-48VDC = Same as PXES4P-24VDC model, except for -48VDC power input.PXESTRAY = 19” Rack-mount tray for 14-series Switch models, up to 16 unitsPXESDINRL = Metal DIN-Rail mounting bracket for one PXES4P Series2.0 INTRODUCTIONThis section describes PXES4P Series models, including appearance, features andtypical applications.2.1 Inspecting the Package and the ProductPXES4P Switches Installation and User Guide (10/06)15shipment or delivery. Inspect the contents of this package for any signs of damage andensure that the items listed below are included.This package should contain:1 PXES4P Series Switch Unit1 External Power Supply (d, i model only)1 set Metal panel mounting clips and screws, 2 each1 User Guide, i.e., this manual (continued next page)