ManualPowerXL™DC1Variable Frequency DrivesParameter ManualPara-meterDesignation Value Description DSP00-01 Analog Input1 0 - 1000 Analog input 1Level of the signal applied to analog input 1 afterscaling and offsets have been applied.0P00-02 Analog Input 2 0 - 1000 Analog input 2Level of the signal applied to analog input 2 afterscaling and offsets have been applied.0P00-03 Frequency Reference -P-01 - +P-01 Frequency Reference in Hz.Will be calculated into rpm when motor data areavailable. Value of the drive internal digital reference0…11/16 MN04020004Z-EN

Eaton PowerXL DC1 Manual

PowerXL DC1

About this manual

Abbreviations

Mains supply voltages

DC1 device series

System overview

Checking the delivery

Rated data

Key to part numbers

General rated operational data

Features

DC1 layout

Selection criteria

Proper use

Maintenance and inspection

Charging the internal DC link capacitors

Engineering

Electrical power network

Mains voltage and frequency

Total Harmonic Distortion (THD)

Idle power compensation devices

Safety and switching

Residual current device (RCD)

Mains contactors

Motor and Application

Circuit types with three-phase motors

Bypass operation

Connecting EX motors

Single-phase AC motors

Mode of operation of DC1-S2... frequency inverter

Installation

Mounting position

Control panel installation

Fixing

EMC installation

Earthing

EMC screw

VAR screw

Electrical Installation

Connection to power section

Connection on control section

Block diagrams

Insulation test

Operation

Operational hazard warnings

Commissioning with control signal terminals (default settings)

Error messages

Error list

Parameters

Operating unit

Display unit

Parameter selection

Digital and analog inputs

Digital Input (DI)

Analog Input (AI)

Digital / analog outputs

Drives control

Second acceleration and deceleration time

frequency jump

Start Function

Motor

Fixed frequency setpoint values

V/f characteristic curve

Braking

Operational data indicator

Setpoint input (REF)

Serial interface (Modbus RTU)

Serial interface A-B

Modbus parameters

Operating mode Modbus RTU

Structure of the master request

Structure of the slave response

Modbus: Register mapping

Explanation of function code

CANopen

Bus termination resistors

Set CANopen station address

Object list

Communication-specific objects

Server SDO Parameter

Manufacturer-specific objects

Appendix

DC1-S2

DC1-32

Dimensions and frame size

PC interface card

drivesConnect

Cables and fuses

Braking resistances

Mains chokes

Motor reactors

Sinusoidal filter

Writing conventions

Documents with additional information

Checking the Delivery

Rated operational data

Description

IP66 degree of protection (FS1 to FS3)

Voltage categories

Output reduction (derating)

Residual current circuit-breaker (RCD)

Radio interference suppression filter

Motor chokes

Sine filter

Switching to the output side

switch-disconnectors

Bypass circuit

Connecting Motors in Parallel

Three-phase motor

Mounting

IP66 / NEMA4X degree of protection

Internal filters (EMC and VAR screws)

Screen earth kit

EMC cable brackets

General installation diagram

Thermistor connection

DC1-1D

DC1-12

DC1-32..., DC1-34... (in FS1, FS2, FS3)

DC1-32..., DC1-34... (in FS4)

DC1-1D...Nx-A6SN

DC1-1D...Nx-A66N

DC1-12...-A6SN

DC1-12...-A66N

DC1-32...-A6SN, DC1-34...-A6SN

DC1-32...-A66N, DC1-34...-A66N

Insulation testing

Protection against electric shock

Commissioning with control terminals (default settings)

Commissioning with local controls

Handling the keypad

Adjust parameters

Extended parameter set

Help leaflets

Fault list

Technical Data

Specific rated operational data

DC1-1D...device series

DC1-12...device series

DC1-32... device series

DC1-34...device series

Dimensions

Frame size FS4 in IP20

Frame sizes FS1 to FS3 in IP66

Cable cross-sections

Fuses

Accessories

DXC-EXT-IO... coupling module

DXC-EXT-2RO output expansion

DXC-EXT-2RO1AO output expansion

DXC-EXT-LOCSIM simulator

General accessories (List)

Hazard warnings of personal injury

Designations for the elements in variable frequency drives with an IP20 degree of protection

Designations for the elements in variable frequency drives with an IP66 degree of protection