SDR-RINT Internal Radio SounderInstallation InstructionsIntroductionThe Eaton SDR-RINT InternalRadio Sounder producessounds to indicate alarms,entry tones, exit tones andother conditions. The sounderis the radio equivalent of theEaton Internal Wired Sounder.The sounder is intended foruse in areas that are out ofaudio range of keypads orpanels but where users needto hear system sounds.The sounder cancommunicate with a radioexpander or a controlunit that has built-in radiocommunications. The sounder is compatible with both i-on andMenvier intrusion systems.Note:• The sounder uses four AA batteries. You can use an optional 12Vdcexternal supply to extend battery life.• The maximum number of internal sounders you can use isdependent on the intrusion system. For details of system limits,please refer to the appropriate engineering guide.• The sounder requires control unit software v4.05 or higher and ifapplicable, radio expander software v2.09 or higher.• If you are using expanders, it is advisable to distribute both internaland external sounders across different expanders to maintain goodresponse times.This product must be installed by qualified service personnel.