Eaton TRIPP LITE B004-DP2UA2-K Instruction Manual

Also see for TRIPP LITE B004-DP2UA2-K: Quick start guide

Refer to the following steps and diagram to set up your KVM switch installation.Notes:• Before making any connections, make sure power to all devices being connected to the KVM switch is turnedoff. Unplug the power cords of any computers that have the Keyboard Power On function.• It is recommended that the total length between the console monitor and connected computers(including the KVM) not exceed 10 ft. (3 m).1 Connect your monitor to the DisplayPort console port on the KVM switch.Note: You can connect a DVI, HDMI or VGA monitor using a DisplayPort to DVI, HDMI or VGA adapter (see theFeatures and Optional Accessories sections of this manual for details).ORIf the computers you are connecting have graphics cards that support Multi-StreamTransfer (MST), and you wish to connect multiple monitors, you can connect an MST Hub tothe DisplayPort console port on the KVM switch. You can then connect multiple monitorsto the monitor ports on the MST hub, and use the computer’s graphics card displaysettings to customize how video is being displayed. This can also be achieved without anMST hub when using DisplayPort monitors that feature MST input and output ports forchaining multiple monitors together.2 Connect your USB keyboard and mouse into the corresponding USB console ports of theKVM switch (the console mouse port is on top, and keyboard port on bottom).3 Optional – A USB hub can be connected to the USB console mouse port, allowing you toadd multiple USB peripherals to your installation.Note: To ensure proper functionality, use a hub with an external power supply. Also, the KVM’s MouseEmulation Mode must be disabled (see the Hotkey section of this manual for details) when connecting a hub.4 Connect your speakers to the console audio jack on the KVM switch.5 Connect a set of computer monitor, keyboard/mouse and audio ports on the KVM switchto a computer using the included DisplayPort, USB and 3.5 mm stereo audio cables.6 Optional – Repeat step 5 to connect a second computer.7 Optional – Connect the Remote Port Selector to the corresponding 3.5 mm jack on theKVM switch.8 Turn on the power to all connected devices. The KVM switch focus will automatically switchto the first computer that is powered on.PC 1PC 2(optional)(optional)Console5Installation1 746255