31. Safety information1.1. Dangers of maloperationThe WSPS 05 underwent a safety and acceptance test based on IEC 1010-1/EN 61010 – 1part 1. Integrated electronic and hydraulic elements serve protection purposes and ensuresafe handling if used the conventional way. False operation or abuse, as well asinsensitivity for the device’s limits and safety instructions will result in immediate danger forthe following: the operator’s health and life, the WSPS 05 and all systems it is connected to, the accuracy of the WSPS 05, the environment.This manual includes information and safety instructions, which guarantee safe handlingand support your devices unobjectionable condition.Therefore it is a necessity for all people who operate, install or maintain this device to mindthis manual.1.2. Conventional useWith this WSPS 05 you have purchased an effective diagnostic system for the saturationlevel of water in oil. It operates very reliable and meets the requirements of daily use.The set is recommended and tested for the use with:Standard hydraulic oils: HL, HLPTriglyceride: HETGAircraft hydraulics: Mil H 5606Synthetic ester: HEESLubrication oils: CLPLimits:Maximum acceptable pressure at the sensor 25 bar (362,5 psi)Maximum oil temperature 90° C (194° F)Maximum acceptable flow rate at the sensor 2 m/s (6,5 ft/s)The WSPS 05 should always be operated with 12...30 V DC!