Eaton xComfort F94 Series Assembly Instructions Manual

63. Manual operation:Manual operation of switching actuator, dimmingactuator1. Press the configuration pushbutton with a screwdriverlonger than 2 sec => actuator enters manual mode for10 sec, the LED flashes fast2. Press the configuration pushbutton with a screwdriver for less than 0.5 sec => Lamp (LED) is on3. Press the configuration pushbutton with a screwdriver for less than 0.5 sec => Lamp (LED) is off4. The actuator leaves automatically the manual modeManual operation of the Shutter actuator1. Press the configuration pushbutton with aScrewdriver for longer than 2 sec => actuator entersthe manual mode for 10 sec the LED flashes fast2. Press the configuration pushbutton with a screwdriver for less than 0.5 sec => Shutter moves up3. Press the configuration pushbutton with a screwdriver for less than 0.5 sec => Shutter moves down4. After 10 sec the actuator leaves automatically the manual mode4. Reset actuator1. Press the configuration pushbutton with a screwdriver for lessthan 0.5 sec => actuator enters teach-in mode, the LED in theactuator lights2. Press and hold the configuration pushbutton with a screwdriveruntil LED has flashed 5 times3. The actuator leaves teach-in mode automatically after a few seconds

/ 8

Related manuals for Eaton xComfort F94 Series