18-5-2011 7 033000=15299B6. Repeat this procedure from step 1 for the other equipment you want tocontrol (DVR, DVD, STB,...). If your equipment (TV, STB, etc....) does not respond,try the other codes for your brand. If it still doesn’t respond, try the manualcode search method (4.4 Manual code search).4.2. Automatic code search for some well-known brandsIf your brand is listed hereafter, you can use the brand search method (fasterthan the "manual" and the "automatic code search").BRAND CODE BRAND CODEPhilips /Radiola 1 Telefunken / Saba/ Normende 4Akai /Daewoo / JVC/ Panasonic /Sharp / Sony /Toshiba2 Grundig /Blaupunkt 5Brandt /Thomson 3 Nokia / ITT 61. Turn on the device you want to control.2. Press and hold S (8) until the LED indicator (2) lights steadily. Release Sbutton.3. Press the mode button (4) that matches the equipment you wish to control.The LED (2) blinks once.4. Enter the code corresponding to your brand, point the TAKE 6 Remote in thedirection of your equipment, press CHAN+ (6) once only. Continue to point theTAKE 6 Remote at your equipment until the equipment changes Channel (theremote control sends an IR signal every second. Please wait until yourequipment reacts). When your equipment does react, press on the key -/--(13) to confirm. If you accidentally miss the code, you can stop theautosearch by pressing CHAN- (6) and by repeatedly pressing this key returnto the right code. Press -/-- (13) to confirm.4.3 Automatic code search for all brandsWhen searching an unknown code, you can step through the libraryautomatically (AutoSearch). When your equipment responds, you can stopthe searching process and store the code you found.Note: as you can dedicate any appliance (TV, DVD, STB...) to DVR, DVD, CD,STB, AUDIO or AUX key, you need first to enter any 4-digit code for the kind ofappliance you wish to control (found in the code book), i.e.: If you want toprogram a STB under the DVR key, enter ANY STB code found in the codebook and then follow the steps below:1. Turn on the device you want to control.2. Press and hold S (8) until the LED indicator (2) lights steadily. Release Sbutton.3. Press the mode button (4) that matches the equipment you wish to control.The LED (2) blinks once.4. Press CHAN+ (6) once. After a few seconds the remote starts steppingthrough the code library (fast search, 1 code per second). When the deviceresponds, you can press CHAN+ (6) to switch to slow search (1 code per 3seconds). You can step back by pressing CHAN- (6) (you can step forward bypressing CHAN+ (6) in case you went too far back). As soon as the deviceresponds again, press the -/-- key (13) to store the code you found.Remark: if some functions of your equipment don’t work, you need to tryanother code for your brand. The search function starts after the lastconfirmed code. For example, if it was 030, the search function starts at 031,and it will keep on trying until the last possible code.4.4 Manual code searchNote: as you can dedicate any appliance TV, DVR, DVD, STB, AUDIO, AUX,keys, you first need to enter any 4-digit code for the kind of appliance youwish to control (found in the code book), i.e.: If you want to program a STB