Ebyte E10 Series User Manual

Contents

Ebyte E10 Series User Manual Manual pdf 4 page image

SI4463 wireless module E10 series user manualCopyright ©2012–2017，Chengdu Ebyte Electronic Technology Co.,Ltd.31. Technical Parameter1.1. General ParameterModel Core IC Size Net WeightOperatingTemperatureOperatingHumidityStorageTemperatureE10-433MS SI4463 14.5 * 18.5 mm 0.8±0.1g -40 ~ 85°C 10% ~ 90% -40 ~ 125°CE10-433MS1W SI4463 25 * 37 mm 5.0±0.1g -40 ~ 85°C 10% ~ 90% -40 ~ 125°CE10-868MS20 SI4463 15*20 mm 1.5±0.1g -40 ~ 85°C 10% ~ 90% -40 ~ 125°CE10-868MS30 SI4463 25*40 mm 5.0±0.1g -40 ~ 85°C 10% ~ 90% -40 ~ 125°CE10-915MS20 SI4463 15*20 mm 1.5±0.1g -40 ~ 85°C 10% ~ 90% -40 ~ 125°CE10-915MS30 SI4463 25*40 mm 5.0±0.1g -40 ~ 85°C 10% ~ 90% -40 ~ 125°C1.2. Electrical Parameter1.2.1. Transmitting currentModel Min Typ Max Unit RemarksE10-433MS 76.4 83.0 91.3 mA ●When designing current supply circuit, 30% margin is recommendedto be remained so as to ensure long-term stable operation of thewhole module;●The current at the instant of transmitting may be high, but the totalenergy consumed may be lower due to very short transmitting time;●When using external antenna, the impedance matching degree atdifferent frequency points between antenna and module may affectthe transmitting current value at different levels.E10-433MS1W 607.2 660.0 726.0 mAE10-868MS20 87.4 95.0 104.5 mAE10-868MS30 672.5 731.0 804.1 mAE10-915MS20 90.2 98.0 107.8 mAE10-915MS30 692.8 753.0 828.3 mA1.2.2. Receiving currentModel Min Typ Max Unit RemarksE10-433MS 14.7 16.0 17.6 mA ●The current consumed when the RF chip is only working at receivingmode is called as receiving current，the tested receiving current maybe higher for some RF chips with communication protocol or thedevelopers have loaded their own protocol to the whole module;● The current at pure receiving mode will be mA level, users canrealize μA level of receiving current through firmware development.E10-433MS1W 20.2 22.0 24.2 mAE10-868MS20 14.7 16.0 17.6 mAE10-868MS30 18.4 20.0 22.0 mAE10-915MS20 14.7 16.0 17.6 mAE10-915MS30 18.4 20.0 22 mA1.2.3. Turn-off currentModel Min Typ Max Unit RemarksE10-433MS 0.3 0.6 2.1 μA● The turn-off current means the current consumed by CPU, RAM,Clock and some registers which remain operating. SoC is at very lowpower consumption status;● The turn-off current is always lower than the current consumedwhen the power supply source of the whole module is at no-loadstatus.E10-433MS1W 2.5 5.0 6.5 μAE10-868MS20 0.2 0.4 1.9 μAE10-868MS30 2.5 5.0 6.5 μAE10-915MS20 0.2 0.4 1.9 μAE10-915MS30 2.5 5.0 6.5 μA