Ebyte E810-DTU User Manual

Also see for E810-DTU: User manual User manual User manual User manual User manual

Ebyte E810-DTU User Manual Manual pdf 12 page image

Chengdu Ebyte Electronic Technology Co.,Ltd E810-DTU(1RS1E) User ManualCopyright ©2012–2019, Chengdu Ebyte Electronic Technology Co.,Ltd 113.4.2 Heartbeat package functionIn the network transparent transmission mode, the user can choose to have the E810-TTL send a heartbeat packet. Theheartbeat packet can be sent to the network server or sent to the serial device. It cannot be run at the same time.The main purpose of sending to the network is to maintain a connection with the server, which only takes effect in the TCPClient and UDP Client modes.In an application where the server sends a fixed query command to the device, in order to reduce the communication traffic, theuser may select to send a heartbeat packet (query command) to the serial device to replace the query command sent from the server.The E810-TTL module supports up to 40 bytes of custom heartbeat packets.3.4.3 Registration package functionIn the network transparent transmission mode, the user can choose to have the module send a registration package to the server.The registration package is for the server to recognize the data source device or as a password to obtain the server functionauthorization. The registration package can be sent when the module establishes a connection with the server, or can be spliced into theregistration package data at the forefront of each data packet as a data packet. The data of the registration package can be a MACaddress or a custom registration data, wherein the custom registration package setting content is up to 40 bytes.The connection sending registration package is mainly used to connect the servers that need to be registered.Data carrying registration package: The sending data accesses the registration package at the front end of the data, and ismainly used for protocol transmission.The registration mechanism is only applicable to TCP client and UDP client, which is invalid under TCP server and UDPserver.