Echo 99944200540 Operator's Manual
Also see for 99944200540: Operator's manualOperator's manual
                | |
Trimmer ATTAchmenTOperATOr 's mAnuAl11lubrICaTIonLevel 1.Parts Required: POWER BLENDX TM 8 oz. or LithiumBase Grease.Gear Housing1. Clean all loose debris from gear box.2. Remove plug (A) and check level of grease. Grease should fill gearcase to bottom of grease plug hole.3. Add grease if necessary using manual grease gun or squeeze-typetube. Do not use high pressure grease gun. DO NOT over-fill.4. Install plug (A).ADrive Shaft (Lower)1. Loosen two (2) screws (B) and remove center locating screw (C).Pull gear box and shield from drive shaft housing.2. Pull flexible cable from the drive shaft housing, wipe clean andre-coat with a thin coating [15 ml (1/2 oz.)] grease.3. Slide the flexible cable back in the drive housing. DO NOT getdirt on the flex cable.4. Install the gear housing and shield assembly.IMPORTANTFlat edge of washers (D) must be against drive shaft.BCD |
Related manuals for Echo 99944200540
Echo 99944200545 Operator's Manual
Echo 99944200545 Operator's Manual
Echo 99944200840 Operator's Manual
Echo 99944200615 Operator's Manual
Echo 99944200610 Operator's Manual
Echo 99944200485 Operator's Manual
Echo 02999999 Operator's Manual
Echo Rapid Loader 99944200610 Operator's Manual
Echo GT-200 Operator's Manual
Echo SRM - 340 Operator's Manual
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine