8 X77702093405© 08/2013 ECHO Inc.SAFETY 99944200553Keep a Firm Grip• Hold the front and rear handles with both hands, with thumbsand fingers tightly encircling the handles.Keep a Solid Stance• Maintain footing and balance at all times. Do not stand onslippery, uneven or unstable surfaces. Do not work in oddpositions or on ladders. Do not over reach.Avoid Hot Surfaces• During operation, the drive shaft housing and attachmentbearing housing may become very hot, too hot to touch. Avoidcontact during and immediately after operation.EquipmentUse this attachment with ECHO approved models only. Serious injury may result from the use of thisattachment combined with a non approved ECHO product.• Check unit for loose/missing nuts, bolts, and screws. Tighten and/or replace as needed.• Inspect ProSweep brushes for damage and that they are firmly secured in place. Replace brushes ifdamaged or missing.• Check that the ProSweep attachment is firmly attached and in safe operating condition.Note: ECHO, INC. will not be responsible for the failure of cutting devices, attachments or accessorieswhich have not been tested and approved by ECHO.Moving parts can amputate fingers or cause severe injuries. Keep hands, clothing and loose objectsaway from all openings.◆ ALWAYS stop engine, disconnect spark plug, and make sure all moving parts have come to a completestop before removing obstructions, clearing debris, or servicing unit.◆ DO NOT start or operate unit unless all guards and protective covers are properly assembled to unit.◆ NEVER reach into any opening while the engine is running. Moving parts may not be visible throughopenings.