Echo 99944200590 , SRM-2100SB/2400SB SRM-210SB/211SB SRM-260SB/261SB PAS-2100/2400 PAS-210/211 PAS-230/231, PAS-260/261, PAS-2601 Operator's Manual

Contents

PAS ARTICULATING H EDGE C LIPPER ATTACHMENTOPERATOR'S MANUAL 3Throughout this manual and on the product itself, you will find safetyalerts and helpful, information messages preceded by symbols or keywords. The following is an explanation of those symbols and key wordsand what they mean to you.This symbol accompanied by the words WARNING andDANGER calls attention to an act or condition that canlead to serious personal injury to operator and bystand-ers.The circle with the slash symbol means whatever isshown within the circle is prohibited.IMPORTANTNOTEMANUAL S AFETY SYMBOLS AND IMPORTANT INFORMATIONIMPORTANT The enclosed messageprovides information necessary for theprotection of the unit.NOTE This enclosed message providestips for use, care and maintenance of theunit.SAFETYDECALSLocate these safety decals on your unit. The complete unit illustration found in the "DESCRIPTION" section, will helpyou locate them. Make sure the decals are legible and that you understand and follow the instructions on them. If a decalcannot be read, a new one can be ordered from your ECHO Dealer. See PARTS ORDERING instructions for specificinformation.Shaft DecalWARNING DANGERThis unit is not designed to insulate against hazards associated with the contact of wirescarrying electrical current.To avoid possible injury/death due to electrical shock or other hazards. DO NOT operate unit ifany wires (power, telephone, cable, etc.) are closer than 15 feet (4/5 meters minimum distance,to any part of the unit or operator.WARNING DANGERThis unit can be dangerous if used improperly. • Falling objects and/or bladecontact can cause serious injury to operator, helpers and bystanders. • Keep helpersand bystanders at least 50 feet (15m) clear of operating area. • To reduce injury risk,READ AND UNDERSTAND the operator's Manual, replacement copies are availablethrough your ECHO dealer. • Wear Protective clothing (head, hearing and eyeprotection meeting ANSI standards) specified in the Operator's Manual. • STOPengine before making repairs or blade adjustments. • ALWAYS use adjustment handlewhen adjusting blade angle. • Keep hand away from blade.P/N 89016012360