Echo GT-225 - 10-09 Operator's Manual

Also see for GT-225: Parts catalog Parts catalog Operator's manual Operator's manual Operator's manual

Grass TrimmerOperaTOr's manual 9_____ - Trimmer Assembly:_____ - Power Head____ - Drive Shaft Assembly_____ - Plastic Bag (Co-Pack)_____ - Operator's Manual_____ - Safety Manual_____ - Warranty Card & Limited Warranty_____ - Locking Tool, P/N 89751801131 (head locking tool)_____ - Safety Glasses_____ - Echo Power Blend X TM 2-stroke oil sample_____ - 12 pcs. 8 in. x .080 Pre-cut Nylon Line_____ - Rapid LoaderTM 2-line Head_____ - Shield Assembly_____ - Line Head Mounting Hardware:_____ - 3/8-24 Locknut_____ - Small Washer_____ - Large Washer*____ - Locking Tool, P/N 89751801131 (wrench handle)*____ - Wrench 17 x 14.5, P/N X602000031assemblyTools Required: Locking Tools (2), Wrench 17 x 14.5 (9/16 in.)Parts Required: Rapid LoaderTM Head, Large washer, Small washer,3/8-24 Locknut, (2) Pre-cut Nylon Line 8 in. x .080 in., Plastic Shield AssemblyWARNINGCut-off knife on debris shield has sharp edges. Avoid contact wheninstalling or removing line head.contentsThe ECHO product you purchased has been partially assembled for your convenience. Due to packaging restrictions,installation of the plastic debris shield, nylon line head, and positioning of the front handle may be necessary.After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or missingparts. Use the contents list to check for missing parts.* Some Echo units may be factory pre-assembled. The nylon line head, plastic debris shield, and mounting hardwareshown in the contents list are pre-assembled to the unit. Assembly tools are not supplied with these units. The fronthandle may need to be re-positioned for comfortable operation.