Echo PPT-2100 Operator's Manual

Also see for Power Pruner PPT-2100: Operator's manual Operator's manual Operator's manual Operator's manual Service data

141. Loosen bolt (A).2. Match square socket in engine shaft with square power transmis-sion shaft (B) and slide together until engine rests against themachine surface of lower shaft tube housing coupler (C).3. Rotate lower shaft tube housing to align engine and rear handleassembly in an upright position.4. Tighten bolt (A) securely so engine will not rotate on lower shafttube.ASSEMBLYSHAFT TUBE / POWER HEADTools Required: T-wrench, 8-10 mm Wrench, Combination L-WrenchParts Required: Power Head, Shaft Tube Assembly; Cutting Attach-mentBACFAN HOUSINGED DCUTTING ATTACHMENT TO SHAFT TUBE INSTALLATIONALIGN & PUSHBOTTOMVIEWWARNING DANGERSaw Chain is sharp! Always wear gloves when handling assembly,otherwise serious personal injury may result.1. Loosen the four (4) screws (D) and locator screw (E) on cuttingattachment.NOTEDo not remove locator screw (E) completely from cutting attach-ment, otherwise inner lock nut will come off and be lost.A