Echo Power Pruner PPF-210 Operator's Manual

Also see for PPF-210: Installation and operating instructions Operator's manual

10WARNING DANGERSaw chain is sharp! Always wear gloves when handling cuttingattachment, otherwise serious personal injury may result.1. Loosen the (4) four lower bolts (A) on the cutting attachment, andremove location bolt (B).2. Slide the cutting attachment onto the shaft housing until the holein the neck of the cutting attachment is aligned with the hole (C) inthe housing. (It may be necessary to rotate the saw chain slightlyto align the internal pinion and drive shaft.)3. Insert location bolt (B) into hole (C) and tighten to snug.4. Tighten bolts (A), clamping the cutting attachment onto thehousing.CONTENTSDue to packaging restriction the ECHO product you have purchased requires some assembly.After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or missingparts. Use the contents list to check for missing parts.__ Power Head/Drive Shaft Assembly__ Cutting Attachment__ Operator's Manual__ Safety Manual__ Warranty Registration Card__ Warranty Statement__ 1, T-Wrench (Combination screwdriver/spark plug socket)__ 1, 4 mm Hex Wrench__ Safety Glasses__ Echo Power Blend TM 2-stroke oil sample__ Shoulder Harness__ Guide Bar CoverASSEMBLYFor your convenience the Power Pruner TM has been shipped with the power head attached and throttle linkage assembled.We recommend the power head remain attached to the drive shaft and housing at all times.Tools Required: 3 mm Hex Wrench, Screwdriver, T-wrenchParts Required: Power Head/Drive Shaft, Cutting Attachment,3-foot Extension (Optional) P/N 99946400010CUTTING ATTACHMENT TO DRIVE SHAFT INSTALLATIONBCA A