Echo SRM - 260S Operator's Manual

Also see for SRM - 260S: Operator's manual Operator's manual Operator's manual Operator's manual Operator's manual

Contents

GRASS T RIMMER /BRUSH CUTTEROPERATOR' S M ANUAL 138 Tooth Weed/Grass Blade (P/N 69600120331) is designed for grass,garden debris, and thick weeds. DO NOT use this blade for brush orheavy woody growth, 19 mm (3/4 in.) diameter or larger.Brush/Clearing Blade (P/N 69500120330) is designed for cutting brushand woody growth up to 76 mm (3 in.) diameter.Use Shoulder/Waist Harness (P/N 30100052131) Use of the Shoulder/Waist Harness reduces operator fatigue and the possibility of bladecontact with the operator's hands and feet by restricting trimmermovement.HARNESS CLAMP INSTALLATION(Plastic or Nylon Blade Use)Tools Required: Screwdriver, 8mm x 10mm Open-End Wrench.1. Remove shield and gear housing as an assembly.a. Loosen two (2) screws (A) that clamp the gear housing to thedrive shaft housing.b. Remove locating screw (B) found at the top of the gearhousing. Pull shield and gear housing assembly from the driveshaft assembly.IMPORTANTPrevent drive shaft from sliding from drive shaft housing. If shaftdoes slide free, clean dirt from shaft and re-assemble.ABA