Echo SRM-211 Operator's Manual

Also see for SRM-211: Installation and operating instructions Operator's manual

Echo SRM-211 Operator's Manual Manual pdf 26 page image

26STARTING WARM ENGINEThe starting procedure is the same as Cold Start except DO NOT closethe choke.WARNING DANGERThe cutting attachment should not rotate at idle. If attachmentrotates, readjust carburetor according to "Carburetor Adjustment"instructions in this manual or see your ECHO Dealer, otherwiseserious personal injury may result.1. Stop Switch - Start/Run. Move Stop Switch button (A) away fromthe STOP position.2. Primer - Pump Bulb. Pump primer bulb (C) until fuel is visiblein the "Clear" fuel return line. Pump bulb an additional 4 or 5 times.3. Start - Pull Rope. Lay the trimmer on a flat clear area and pullthe recoil starter handle (D) until the engine fires.NOTEIf engine does not start after 5 pulls, use Cold Start Procedure.ADC