G RASS TRIMMER /BRUSH C UTTEROPERATOR 'S MANUAL 17STARTING WARM ENGINEThe starting procedure is the same as Cold Start except DO NOT closethe choke, and do not depress throttle trigger to wide open position.WARNING DANGERThe attachment should not move at idle, otherwise serious personalinjury may result.NOTEIf attachment moves, readjust carburetor according to “CarburetorAdjustment” instructions in this manual or see your ECHO Dealer.1. Stop SwitchMove stop switch button (A) away from the STOP position.2. PrimerPump primer bulb (C) until fuel is visible and flows freely in theclear fuel tank return line. Pump bulb an additional 4 or 5 times.3. Recoil StarterLay the unit on a flat area and keep movable attachment parts clearof all obstacles. Rapidly pull recoil starter handle/rope (D) untilengine fires.NOTEIf engine does not start after 5 pulls, use Cold Start Procedure.STOPPING ENGINE1. ThrottleRelease throttle and allow engine to return to idle before shuttingoff engine.2. Stop SwitchMove stop switch button (A) backward to STOP position.WARNING DANGERIf engine does not stop when stop switch is moved to STOPposition, close choke - COLD START position - to stall engine.Have your ECHO dealer repair stop switch before using trimmeragain.DCAA