Echo SRM-230 - 12-08 Operator's Manual

Also see for SRM - 230S: Operator's manual Operator's manual Operator's manual Parts catalog Operator's manual

10ACNYLON LINE HEAD INSTALLATIONTools Required: Head Locking Tool.Parts Required: Nylon Line Head.CAUTIONWear Gloves or personal injury may result:• Cutoff knife is sharp.• Gearcase and surrounding area may be hot.1. Be sure adapter plate (C) remains on PTO shaft.2. Align locking hole in upper plate with notch in edge of gearhousing and insert head locking tool (D).3. Thread line head (E) onto shaft by turning it counter-clockwiseuntil head is tight against adapter plate (C).4. Remove locking tool (D).DETO ADVANCE TRIMMER LINETip:To advance trimmer line, tap trimmer head against the groundwhile the head is turning at normal operating speed.NYLON LINE REPLACEMENTSee Maintenance Section for nylon line replacement.REMOVE NYLON LINE HEADNOTEDo not disassemble nylon line head.1. Align locking hole in upper plate with notch in edge of gearhousing and insert head locking tool (D).2. Remove line head (E) by turning it clockwise until head iscompletely off of shaft.3. Remove locking tool (D).DE