Echo SRM-266T Operator's Manual

Also see for SRM-280: Operator's manual Installation instructions Operator's manual

Grass Trimmer /Brush CuTTer23OPERATOR'S MANUALcarburetor adjustmentEngine Break-InNew engines must be operated a minimum duration of two tanks of fuelbreak-in before carburetor adjustments can be made. During the break-in period your engine performance will increase and exhaust emissionswill stabilize. Idle speed can be adjusted as required.High Altitude OperationThis engine has been factory adjusted to maintain satisfactory starting,emission, and durability performance up to 1,100 feet above sea level(ASL) (96.0 kPa). To maintain proper engine operation and emissioncompliance above 1,100 feet ASL the carburetor may need to be ad-justed by an authorized ECHO service dealer.IMPORTANTIf the engine is adjusted for operation above 1,100 feet ASL, thecarburetor must be re-adjusted when operating the engine below1,100 feet ASL, otherwise severe engine damage may result.Level 2.Parts required: None.NOTEEvery unit is run at the factory and the carburetor is set in compli-ance with emission regulations. Carburetor adjustments, other thanidle speed, must be performed by an authorized ECHO dealer.1. Check idle speed and reset if necessary. If a tachometer is avail-able, idle speed screw (A) should be set to the specifications foundon "Specifications page" of this manual. Turn idle screw (A)clockwise to increase idle speed; counter clockwise to decreaseidle speed.WARNINGWhen carburetor adjustment is completed, the cutting attachmentshould not move at idle, otherwise serious personal injury mayresult.A